Actron AutoAnalyzer CP7665 - Manual (Page 4)

4
3
Section 1. Multimeter Basic Functions
Digital multimeters or DMMs have many special features and functions. This
section defines these features and functions, and explains how to use these
functions to make various measurements.
5
8
4
1
9
7
2
11
6
10
Functions and Display Definitions
1. ROTARY SWITCH
Switch is rotated to turn multimeter
ON/OFF and select a function.
2. DC VOLTS
This function is used for measur-
ing DC (Direct Current) Voltages in
the range of 0 to 500V.
3. OHMS
This function is used for measur-
ing the resistance of a component
in an electrical circuit in the range
of 0.1
Ω
to 20M
Ω
. (
Ω
is the electri-
cal symbol for Ohms)
4. DIODE CHECK
This function is used to check
whether a diode is good or bad.
5. HOLD
Press HOLD button to retain data