Actron AutoScanner® Plus CP9580A - Manual (Page 80)

Diagnostic Menu
4 – 24 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
View Freeze Data
When an emission-related fault occurs, certain vehicle conditions are
recorded by the on-board computer. This information is referred to as
freeze frame data. View Freeze Data is a snapshot of the operating
conditions at the time of an emission-related fault.
✓
View Freeze Data can be overwritten by faults with a higher priority.
✓
If codes were erased, View Freeze Data may not be stored in vehicle
memory depending on vehicle.
From the Diagnostic Menu:
1.
=====================
View Fre eze Data
Drive Cycle Monitor
O2 Monitor Tests
Diag Monitor Tests
On-Board Systems
Vehicle Information
Diagnostic Menu
View Fre eze Data
Select View Freeze Data.
•Use
UP or DOWN
arrow key until View Freeze
Data is highlighted.
•Press ENTER.
2.
=====================
Entire Data List
P3105 (MOD $02)
Long PID Names
Select Data to View
P0113 (MOD $00)
English / Metric
Select Frame (if more than 1
frame is present).
•Use UP or DOWN
arrow key.
•Press ENTER.
3.
BARO PRS ("HG) 35.1
ABSLT TPS (%) 100.0
TROUB CODE P0113
CALC LOAD (%) 0.0
ENG SPEED(RPM) 0
MAF (LB/M) 0.05
A/C PRESS (V) 3.00
A/F RATIO 14:1
View PID on Scan Tool.
•Use UP or DOWN
arrow key.
•See Appendix A for PID
Definitions.