Actron AutoScanner® Plus CP9580A - Manual (Page 92)

Diagnostic Menu
4 – 36 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
Vehicle Information
The Vehicle Information function allows the Scan Tool to request the
vehicle’s VIN number, calibration ID(s) which identifies software version
in vehicle control module(s), calibration verification numbers (CVN(s))
and in-use performance tracking.
✓
Vehicle Information function applies to model year 2000 and newer
OBD II compliant vehicles.
✓
The Scan Tool cannot verify if data is correct for scanned vehicles.
✓
CVNs are calculated values required by OBD II regulations.
✓
The CVN calculation may take several minutes.
✓
CVNs are reported to determine if emission-related calibrations have
been changed. Multiple CVNs may be reported for a control module.
✓
In-use performance tracking, tracks performance of key I/M Monitors.
From the Diagnostic Menu:
1.
=====================
View Fre eze Data
Drive Cycle Monitor
O2 Monitor Tests
Diag Monitor Tests
On-Board Systems
Vehicle Information
Diagnostic Menu
Vehicle Information
Select Vehicle Information.
•Use
UP or DOWN
arrow key until Vehicle
Information is highlighted.
•Press ENTER.