Acumen AiP-I04Z - Manual (Page 17)

16
camera is 192.168.0.200. A user can use this IP address to verify the network
connection between a local PC and H.264 D1 video server or AiP camera using Web
Browser.
For local area network configuration, please enter, at least, IP address, Subnet Mask,
and Gateway IP. Click Submit button to update these settings.

Default DNS IP Address — Primary Domain Name Server, the IP address of the
domain name server

Second DNS IP Address — Secondary Domain Name Server, the IP address of
the domain name server, a backup DNS server for default DNS

PPPoE Account — Account name of PPPoE service

PPPoE Password — Password of PPPoE service
Chapter 3-4-2 DHCP Setting
Router, gateway, or other software DHCP servers can dynamically assign an IP address
to the H.264 D1 video server or AiP camera. There is no need to configure IP address,
subnet mask, and gateway. Since the DHCP may assign a different IP address to the
H.264 D1 video server or AiP camera after power off, a user can use IPScan utility to
launch Web Browser for searching H.264 D1 video server or AiP camera. To enable
DHCP, click on DHCP option and click on Submit button.
Chapter 3-4-3 HTTP & RTSP Service
HTTP protocol is a reliable protocol for sending video streaming. Port forwarding
technology can be used for sending video over Internet. The detail is described in the
appendix. For changing HTTP service’s port number, please consult available port
number from your network administrator. Change the port number at the port field and
click on “Submit” button.
Note: Once the DHCP option gets enabled, AiP camera of the IP address assigned by
DHCP server. This feature allows only in LAN environment.
For Internet access configuration, please
contact your local ISP for global IP
address. Once the physical Internet
connection gets installed, enter IP
address (global), Subnet Mask, and
Gateway IP from the ISP.