Acumen AiP-I04Z - Manual (Page 18)

17
Chapter 3-4-4 SMTP Service
Alarm or motion notification feature can send an alarm or motion detection snapshot to
an E-mail account. To enable alarm or motion sending E-mail feature, please setup
the following email accounts.
 E-mail receiver setting
E-mail address — E-mail address of
the recipient
 E-mail sender setting
E-mail address — E-mail address of
the sender
 Auto E-mail sent
snapshots —constantly send JPEG
snapshots within E-mail dwell time.
 SMTP server — Sender’s SMTP
server
Authorization
— SMTP server’s
authorization option if applicable
Authorization account
— Account of
the SMTP server
Authorization password
— Password
of the account
To send a test snapshot to a SMTP
server, please click “Send” button to test
and to verify the connection of the SMTP
server.
Chapter 3-4-5 FTP Service
Alarm or motion notification feature can send alarm or motion detection snapshot to an
FTP account. To enable alarm or motion sending FTP feature, please setup the
following FTP account information.
Note: For low latency application, please select RTSP/UDP streaming option.
 FTP server IP/DNS — IP address or domain name of the FTP server
 Account — Account of the FTP server
 Password — Password of the account
 Directory —File path for storing the JPEG snapshots
 Prefix —Prefix of the JPEG filename
 Date format —Date format string for the JPEG filename
 Postfix —Postfix of the JPEG filename
 Auto FTP sent —Constantly send JPEG snapshot within FTP dwell time.
 FTP sent time —Schedule FTP snapshot at specific time