Acumen AiP-I04Z - Manual (Page 8)

7
Chapter 2-2 Configure IP Address Using HTML Page
To change IP address using HTML page, please first type the default IP address,
192.168.0.200, in Internet browser and follow steps below:
 Logon H.264 D1 video server or AiP camera using default username and
password —“admin” and “pass”.
 Click on “Configure” hyper link.
 Click on “Network->General” hyper link.
 Type or modify edit box for IP address, subnet mask, gateway, or HTTP connection
port.
 Click on Submit button.
Chapter 2-3 Internet Browser Setting & Software Component Required
Make sure that your Internet Browser allows signed ActiveX plug-in running on your PC.
Set “Download Signed ActiveX plug-in controls” to “Prompt” and “Run ActiveX control
and plug-
in” to “Enable” at Internet Explorer->Tools->Options->Security Settings.
After finishing above security settings, accessing H.264 D1 video server or AiP camera ’s
live video by default IP address of H.264 D1 video server or AiP camera using Internet
Explorer will prompt a Security Warning dialog box. Click on OK button to download the
ActiveX directly from H.264 D1 video server or AiP camera.
Chapter 2-4 Login
There are two levels of user authentication including administrator and guest for
accessing the H.264 D1 video server or AiP camera.