Acura Embedded AcuBrite 15″-Nav User Manual
Page 15
AcuBrite 15-Nav Manual
<4pts Cal>
Correct 4 point locations on screen with the panel. Press [4 pts Cal], screen displays as follows.
Touch the blinking symbol on panel until beep or stop blinking
.
<Draw Test>
Test the drawing position related to the display screen on panel. Click on the [Draw Test] button. There will be
a squared blue display showing.
In drawing test window, users can click [Clear] button to clear the window. Also, users can click [Quit] or press
mouse right button to quit from the drawing test. In drawing test window, users can verify the panel linearity,
calibration capability, and drawing line quality.
<Advanced>
Touchkit provide more accuracy 25 points calibration for touch sensor. In addition, Touchkit provides
controller setting for capacitive touch sensor. If the capacitive controller is selected, a capacitive setting property
page appears on the advanced sheet. In general case, it does not need to do 25 points calibration other then
bad linearity sensor.
Press [Clear] to clear the previous calibration records.
Press [Yes] to clear previous records. The record will become default record.
Page 14