Acura Embedded AcuBrite 15″-Nav - Manual (Page 20)

AcuBrite 15-Nav Manual
In some case, if it is difficult to touch items at the edges of the touch panel, users can set adjustment to reach
the edges of the screen image.
<Top>
If users set the Edge to <Smaller>, TouchKit will reduce the horizontal position of the top edge. If users set
the Edge to <Larger> , TouchKit will extend the horizontal position of the top edge.
<Bottom>
If users set the Edge to <Smaller>, TouchKit will reduce the horizontal position of the bottom edge. If users
set the Edge to <Larger>, TouchKit will extend the horizontal position of the bottom edge.
<Left>
If users set the Edge to <Smaller> , TouchKit will reduce the vertical position of the left edge. If users set the
Edge to <Larger> , TouchKit will extend the vertical position of the left edge.
<Right>
If users set the Edge to <Smaller>, TouchKit will reduce the vertical position of the right edge. If users set the
Edge to <Larger>, TouchKit will extend the vertical position of the right edge.
In some case, cursor will be behind the finger when users touch the panel. If users can not see the cursor
when they touch down on the panel, users can set X Axis or Y Axis to move the cursor.
<Offset X Axis>
If users set the Offset X Axis to <Smaller>, cursor will be moved a pixel of X Axis to left. If users set the Offset
X Axis to <Larger>, cursor will be moved a pixel of X Axis to right.
<Offset Y Axis>
If users set the Offset Y Axis to <Smaller>, cursor will be moved a pixel of Y Axis to top. If users set the Offset
Y Axis to <Larger>, cursor will be moved a pixel of Y Axis to bottom.
Page 19