Battery charging, How to charge the battery – Toshiba Pocket PC e570 User Manual

Page 17

Advertising
background image

Basic Skills

Instruction Manual

2-5

Version

1

Last Saved on 19/10/01 11:52

TOSHIBA Pocket PC e570 – Ppc_e570.doc – ENGLISH – Printed on 19/10/01 as 01_GENUK

Battery Charging

A built-in battery is installed in the Pocket PC. When using the Pocket PC
for the first time, set the battery switch to the supply side, then charge the
built-in battery with the supplied AC adaptor.

How to Charge the Battery

You can use two charging methods.
When you connect the AC adaptor and the Pocket PC, turn the unit off.

1.

Connect the supplied AC adaptor and the cradle as shown in the
figure below, and then insert the Pocket PC into the cradle.

2.

Connect the supplied AC adaptor and the Pocket PC as shown in the
figure below.

For charging the built-in battery, maintain an ambient temperature from
approx. 5°C to 35°C.
When the lamp is lit in orange during the built-in battery charging, you can
use the Pocket PC.
When the built-in battery is completely charged, the LED alarm lamp color
will change to green.
Carging time to fully charge the built-in battery for the first time or when
completely drained is approximately 3 hours.

Advertising