ACU-RITE DRO 100 - Manual (Page 7)

Introduction DRO 100
2
Lets you know when
you are setting an
absolute zero.
Keypad
Displays
At the top of the display window is a row of indicators. These tell you the current
state of the readout.
In addition to the lighted indicators along the top of the display, the top axis
display will scroll longer messages that will help you step through some of the
procedures.
MM DIA INCR ABS ZERO SET
Appears when you’re
positioning in metric,
dark when you are
positioning in inches.
These tell you if the
position display is
incremental or absolute.
Tells you when an
axis is displaying
diameter.
ZERO
ZERO
Zero an
axis display
MM SETUP
ABS
INCR
RAD
DIA
English / metric
conversion
System setup
parameters
Selects absolute
or incremental
display
Selects radius or
diameter display