Garmin G1000 Piper PA32 - Manual (Page 172)

GPS NAVIGATION
190-00692-00 Rev. B 5-38 Garmin G1000 Pilot’s Guide for Piper PA32
DIRECT-TO NAVIGATION SHORTCUTS USING THE FMS KNOB
Select a Direct-to Destination to a Flight Plan Waypoint
1) While navigating an active flight plan, press the Direct-to ( ) Key.
2) Turn the small FMS Knob to the left to display a list of flight plan waypoints as shown in Figure 5-37.
Figure 5-35 Flight Plan Waypoint List (MFD)
3) Turn the large FMS Knob to select the desired waypoint.
4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
5) Press ENT again to activate a Direct-to.
Select a Direct-to Destination to a Nearest Airport
1) Press the Direct-to ( ) Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-38. The list
is populated only when navigating a flight plan.
Figure 5-36 Nearest Airport List (MFD)
3) Turn the small FMS Knob to the right to display the ‘NRST’ airports to the aircraft’s current position as shown in
Figure 5-38.
4) Turn the large FMS Knob to select the desired airport.
5) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.