Garmin G1000 Piper PA32 - Manual (Page 379)

190-00692-00 Rev. B Garmin G1000 Pilot’s Guide for Piper PA32 8-27
ADDITIONAL FEATURES
NOTE: A subdued softkey label indicates the function is disabled.
The ChartView time critical information can also be found on the AUX - System Status page. The database
‘CYCLE’ number, ‘EXPIRES’, and ‘DISABLES’ dates of the ChartView subscription appear in either blue or yellow
text. When the ChartView ‘EXPIRES’ date is reached, ChartView becomes inoperative 70 days later. This is shown
as the ‘DISABLES’ date. When the ‘DISABLES’ date is reached, charts are no longer available for viewing. The
SHW CHRT Softkey label then appears subdued and is disabled until a revised issue of ChartView is installed.
Press the DBASE Softkey for scrolling through the database information. Scroll through the database with
the FMS knob or ENT Key.
The ChartView database cycle number shown in Figure 8-33, ‘0619’ is broken down as follows:
06 – Indicates the year 2006
19 – Indicates the 19th issue of the ChartView database for the year
The ‘EXPIRES’ date “05–OCT–06” is the date that this database should be replaced with the next issue.
The ‘DISABLES’ date “14–DEC–06” is the date that this database becomes inoperative.
Figure 8-33 AUX – System Status Page, ChartView Current and Available
ChartView
Data
DBASE Softkey
Selected
The ChartView database is provided directly from Jeppesen. Refer to Updating Jeppesen Databases in
Appendix B for instructions on revising the ChartView database.