Garmin G1000 Piper PA32 - Manual (Page 271)

GPS NAVIGATION
190-00692-00 Rev. B 5-137 Garmin G1000 Pilot’s Guide for Piper PA32
List of Legs
in Departure
Sequence
Available Approaches
Map Showing
Selected
Approach
Figure 5-144 Approach Loading Page
WAAS Approach
Channels
Load and/or activate an approach procedure:
1) Press the PROC Key.
2) Highlight ‘SELECT APPROACH’.
3) Press the ENT Key. A list of available approaches for the destination airport is displayed.
4) Turn either FMS Knob to highlight the desired approach. The WAAS channel and ID for the selected approach
procedure are displayed in the ‘APPROACH CHANNEL’ field (Figure 5-145).
5) Press the ENT Key. A list of available transitions for the selected approach procedure is now displayed.
6) Turn either FMS Knob to selected the desired transition. The “Vectors” option assumes vectors will be received
to the final course segment of the approach and will provide navigation guidance relative to the final approach
course.
7) Press the ENT Key. ACTIVATE?’ is now displayed. Selecting ‘LOAD?’ will enter the selected approach procedure
into the active flight plan, but will not be currently active. Selecting ‘ACTIVATE?’ will enter the selected approach
procedure into the active flight plan and make it immediately active.
8) Turn the large FMS Knob to select either ‘LOAD?’ or ‘ACTIVATE?’.
9) Press the ENT Key.