Bosch GLL 2-50 Professional - Manual (Page 16)

16 | English
1 609 929 S02 | (19.3.09) Bosch Power Tools
en
Safety Notes
Working safely with the measuring
tool is possible only when the oper-
ating and safety information are
read completely and the instruc-
tions contained therein are strictly
followed. Never make warning labels on the
measuring tool unrecognisable. SAVE THESE
INSTRUCTIONS.
f
Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those men-
tioned here, can lead to dangerous radia-
tion exposure.
f The measuring tool is provided with a warn-
ing label in English (marked with number 10
in the representation of the measuring tool
on the graphics page).
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam your-
self. This measuring tool produc-
es laser class 2 laser radiation ac-
cording to IEC 60825-1. This can
lead to persons being blinded.
f Do not use the laser viewing glasses as safe-
ty goggles. The laser viewing glasses are used
for improved visualisation of the laser beam,
but they do not protect against laser radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
f Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
f Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
f Do not operate the measuring tool in explo-
sive atmospheres, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
Functional Description
Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.
Intended Use
The measuring tool is intended for determining
and checking horizontal and vertical lines.
OBJ_BUCH-817-004.book Page 16 Thursday, March 19, 2009 12:32 PM