Start the phone – log on/off, Startup procedure, Start the phone – log on – AASTRA 4422 IP Office (SIP) for MX-ONE User Guide User Manual

Page 20: Ection, Start the phone – log, On/off

Advertising
background image

Start the Phone – Log On/Off

Dialog 4422 IP Office

20

Start the Phone – Log On/Off

Startup procedure

All the system settings for your IP phone must be set by the system

administrator before you can use the phone.

Connect the required cables.

See section “

Installation

” on page 98.

Note: Depending on the settings in your network and

telephone system, the start up procedure may be different

from phone to phone. Check the display on your phone and

read the required sections in this chapter to continue with

the start up procedure.

When the phone is connected to the network, your phone

automatically initiates the startup procedure when connected to

the mains.

Notes:

The phone does not work when a power failure occurs.

After a power failure the phone will automatically restart.

After a power failure the Call List is cleared.

When the telephone is starting up (booting) a connected PC

will loose it’s network connection for about 10 seconds.

Advertising