AASTRA 4422 IP Office (SIP) for MX-ONE User Guide User Manual
Page 73
73
Dialog 4422 IP Office
Settings
Press.
One of the following displays is shown.
or
Ô
Press the function key to program or check.
If the key is already programmed, the number or feature will be
displayed.
Note: If you only want to verify the programmed feature,
press the Clear key two times to return to the main menu.
z
Enter phone number or a procedure.
Notes:
A procedure can be, for example the ordering of Follow-me,
(
*21*
Number
#
).
If you want to delete a character, press the Minus key, and
then enter the character again.
You can continue programming another function key
(repeat from “Press the function key to program”).
If you want to erase the number assigned to a key; do not
enter a new number, just press the Speaker key.
Press to save.
Press to return to the previous menu,
or
Settings
Х
Ф
Press to return to idle mode.
Remove the transparent cover and write the feature name or phone
number beside the key.
Note: Use the DCM (Designation Card Manager) to make
and print your own designation cards. DCM is included on
the Enterprise Telephone Toolbox CD or it can be
downloaded from:
For more information, please contact your Aastra Certified
Sales Partner.
Programmable Keys
Press the key to program
Function Keys
Press the key to check