AASTRA 4422 IP Office (SIP) for MX-ONE User Guide - Manual (Page 27)

27 Dialog 4422 IP Office
Start the Phone – Log On/Off
Entering letters and numbers
You can see the most common letters above each key on the
phone. To get the letter A press key 2 once, for B press key 2
twice, to get C press key 2 three times, and so on.
Note: If the word to enter contains a digit, the digit can be
created by pressing the digit key for more than 1 second.
By default, the first character you enter is written in upper case,
and the rest of the word is written in lower case. Every new word
starts with an upper case character (that is after a space has been
entered). However, you can force the phone to enter all characters
as upper case only, or lower case only, see below. *
Press to switch between upper and lower case.
All entered characters are entered as upper or lower case. This is
only valid for the characters A-Z.
ì
Press (-) to correct a wrong entry.
A square is shown around the available characters. If you for
example press
9
, the following character options are shown on the
display:
Press 9
A new character (w, x, y, z or 9) is selected each time you press the
key.
wxyz9