Concord FUSION INSTRUCTION MANUAL - Manual (Page 10)

_ LOCKING THE FRONT wHEELS
To lock the front wheels of the CONCORD FUSION, twist the locking
button (
09 ) into the horizontal position. The button snaps inwards and
locks the wheel in a forward-pointing position. To release the locking
device, pull out the locking button and twist it into the vertical position.
_ ADjUSTING THE SUSPENSION
There is a choice of two settings for the suspension of the rear wheels.
Twist the knob (
19 ) into the horizontal position for a softer suspension or
into the vertical position for a firmer suspension.
41
_ USING THE bRAKE
To lock the brake of CONCORD FUSION, press down the brake lever
(
18 ); press the brake lever upwards to release the brake.
40