Concord FUSION INSTRUCTION MANUAL User Manual
Page 11
_ USING THE ADAPTORS (PROFIx SySTEM)
Various elements can be attached to the CONCORD FUSION using the
ProFix adaptors (
05
).
1. The safety bar (
03
) can simply be inserted in the adaptors. To remove
it, press down the small push buttons (
04
) on both sides of the bar (on
the inside) and pull it out of the adaptors.
2. Some Concord accessories, which are available in specialist shops,
are fitted with adaptors suitable for the CONCORD FUSION, making
it easy to attach them to the CONCORD FUSION. Make sure that the
Concord accessory has engaged properly with the CONCORD FUSION
prior to use.
Please read the appropriate instructions carefully before using any
Concord accessory.
Make sure the child is not in the baby buggy before putting on or
removing the cover or the approved Concord accessory.
43
42
_ PUTTING ON, REMOVING AND LAUNDERING THE
COVER
The different parts of the cover of the CONCORD FUSION are joined
to each other by means of press-studs, Velcro and zip fasteners, and
are attached to the rods. If you wish to remove the cover, first loosen all
these fastenings.
Make sure all the fasteners and connections are done up safety when
you put the cover on.
You can wipe all parts of the cover as well as the rods and the plastic
parts of the CONCORD FUSION with a damp cloth.