Concord FUSION INSTRUCTION MANUAL - Manual (Page 7)

_ FOLDING THE CONCORD FUSION
To fold up the CONCORD FUSION, first push the hood fully back
while fully raising the footrest and the backrest (see ADJUSTING THE
BACKREST). The unlocking levers are located on the left and right of the
handle (
12 ). To unlock, press and hold the safety button on the inside
of the unlocking lever and pull both unlocking levers upwards. Now
push the handle forwards/ down until the transport locking device (
17 )
engages. If you want to save space, position the handle fully forwards
so that it frames the hood and clicks into place in front of the fully raised
footrest (see ADJUSTING THE HANDLE). You can also remove the back
wheels (see ATTACHING AND REMOVING THE BACK WHEELS).
35
Note: Make sure that the small front
wheels are facing forward when you fold
the CONCORD FUSION down. You can
assist the folding process by pressing the
crossbar (
16 ) downwards with your foot.
_ UNFOLDING THE CONCORD FUSION
To unfold the CONCORD FUSION, first move the handle ( 01 ) into a
straight position so that it snaps into position (see ADJUSTING THE
HANDLE). Then release the transport locking device (
17 ) by pressing
it downwards. The CONCORD FUSION can now be unfolded like a
collapsible chair until you hear an audible click.
Note: Hold the handle of the CONCORD FUSION tightly and pull it up
sharply. The CONCORD FUSION should then be almost completely
opened up. Now press the handle down gently until the central locking
device clicks audibly into place. You can assist the unfolding process by
pressing the crossbar (
16 ) upwards with your foot.
34
wARNING!
Before using the CONCORD FUSION,
make sure that all fastening and
locking devices are properly engaged
and securely locked.