Warning – Concord SLEEPER 2.0 INSTRUCTION MANUAL User Manual

Page 5

Advertising
background image

WARNING

• Never leave the baby on their own.

• Always remember to carry your baby with the safety

harnesses correctly buckled.

• For the correct development of your baby, we recommend

you let him rest in the lying down position (for babies up

to 10kg.)

• Any alteration or addition to the device without proper

authorisation from CONCORD may seriously alter the

safety of the retaining system.

• Failure to follow the instructions carefully for the correct

use of the retaining system may be dangerous for the

safety of the baby.

• This safety device cannot be used without its cover, or be

replaced by another cover that is not the original, as this

is an integral part of the safety features of the system.

• Check that the seat has been positioned correctly.

23

22

• Ensure that the belt has not been caught between the

folding seats or doors.

• It is only suitable for cars fitted with three anchoring point

automatic belts, approved according to Regulation ECE-16

or other equivalent rules.

• DO NOT use with a two anchoring point belt.

• Not all safety systems are exactly the same, so we advise

that you check your CONCORD SLEEPER in the car in

which it is going to be fitted.

• It is very important not to use second-hand products, as

CONCORD can only guarantee complete safety with items

used by their first buyer.

• Never leave the child alone.

WARNING:

• Do not add a mattress thicker than 20 mm

_ gEnErAl inSTrUCTiOnS

In order to protect your baby adequately and to ensure

their comfort and stability in the car, the following

instructions must be strictly followed:

• Your CONCORD SLEEPER safety carrycot can be installed

on the back seat of your car. It is advisable to always

install the head part on the middle seat, never next to the

door.

• CONCORD recommends that you replace your CONCORD

SLEEPER safety seat with a new one if it has been

subjected to violent stresses in an accident.

• Check that all the straps are in the correct position and

duly adjusted to your CONCORD SLEEPER. Make sure that

none of the straps are twisted. The child must understand

that he must not play with the straps or fasteners under

any circumstances.

Advertising