EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 149)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
140
The PREVIOUS and NEXT keys appear only when some machines are not
visible on the current page.
L
OCAL MODE
The local system is identified with the Local sign after the name of the
system. The Local function (A) gives direct access to the Local mode and is
highlighted when Local mode is activated.
C
LIPS
M
ODE
The Clip function (B) allows the operator to connect to the clip banks of
another LSM connected to the network. In other words, the VGA clip screen
and the F_ keys of the Remote show the clips from the selected LSM. If the
operator presses the RECORD key, he goes in LIVE mode on the local
record trains.
R
ECORDS
M
ODE
When the operator selects one of the LSM in the network menu, he connects
the record trains to this LSM. This means that the next time he presses the
Records function (C) the active channels will go in LIVE mode (or near LIVE
mode for remote trains
1 ) on the record trains of the selected LSM. The clips
remain connected to the LSM they were connected to.
C
LIPS
+R
ECORDS
M
ODE
The Clip+Rec function (D) allows the operator to both connect to the clips
banks and to the record trains of a remote server. The VGA clip screen and
the F_ keys of the Remote Panel show the clips from the selected server.
The next time the operator presses the RECORD key, the active channels
will go in LIVE mode (or near LIVE mode for remote trains) on the record
trains of the selected LSM.
Select the function key corresponding to the remote system, then the LCD
display returns to the normal mode:
PGM1 112B/04 *PRV1* CAM B
AUX Clip
MIX Sw to IN PGMSpd PREF
P.1 B.1 Clips: ALBERT Records: MICHEL
PL 11: <
Msg:
LOCAL SYNC PRV
CAM A CAM B CAM C CAM D