EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 91)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
82
Info parameter of the Setup is set to “Yes”, it will also appear on the OSD of
the corresponding output monitors if the current picture is the Short IN point
of the clip.
If all 3 keywords location are occupied, the operator has to clear some of
them to be able to assign a new keyword to that clip.
To clear one of the keywords already assigned, press CLEAR + F1 / F2 / F3
in the secondary clip menu.
The clip can also be named based on the keywords. Press the Name function
(C key) in the secondary menu, then select keywords. The keywords will be
added to the name of the clip, up to 12 characters. In this mode, the name of
the clip is visible on the OSD. It can also be edited with the following keys:
• CLEAR: erase the last character
• SHIFT+CLEAR: insert a blank
• SHIFT+F1-F10: insert a number (1, 2, 3, …, 8, 9, 0)
Once the name is complete, press ENTER to validate or MENU to cancel.
While the operator is in the secondary menu, he has full control of the
current clip with the lever, PLAY key and jog dial, so he can browse the clip
and start a replay at any time.
It is also possible to assign keywords and ranking to a clip before it is
created. Indeed, when a record train is loaded, as soon as the operator
marks an IN or OUT point, the main and secondary menu changes to make
the keyword functions available.
The SHIFT+A function of the main menu, normally used by the Reset CAM
function, can be used to define the ranking, without entering the secondary
menu. For additional functions like selecting keywords, flagging the future
clip for archiving, marking it to be pushed to another machine, defining its
name from the keywords, they can be performed from the secondary menu,
exactly the same way as for a clip already stored. All these settings are
memorized and will be applied to the clip when it is created.
PGM1 Cam A *PRV1* Cam B
Push PgmSpd Sw To In Pref
>Archive *** Name Cam
P.1 B.1 Clips: Local Records: Local
PL 11: < >
Msg:
*** Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D