EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 150)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
141
The names of the remote systems are now displayed after the Page and
Bank information and in the Title bar of the Clip screen.
Note
It is possible from the VGA to connect back to the last machine
connected by pressing ALT+<TAB>.
13.4 Operations
When the remote system is selected, the operation with remote clips or
remote trains is similar to the operations on the local system.
13.4.1 H
OW TO
R
ECALL
/P
LAY
B
ACK A
R
EMOTE
C
LIP
1. Select the Clip mode in the Network menu.
2. Select the Remote LSM from the list:
The LCD display returns to the normal mode
3. Select the clip page 1, 2, 3, … to 10 (PAGE key).
When selecting a server, it will automatically reconnect to the page and
bank that was last used.
4. Select the bank in which the desired clip is located
5. Choose the clip required (F1 - F10).
6. If all clips are present (from Camera A, B, C and D), they will appear in
their respective locations (Channel A, B, C or D).