EVS XTnano Version 10.04 - January 2011 Operation Manual - Manual (Page 14)

Issue
10.04.A XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
6
6. Operational Block 2
PLAY Initiates playback.
Network Not used on XTnano.
Last Cue Re-cues EVS server to previous cue point.
Goto TC Allows timecode entry, with «F» keys.
Fast Jog Used with jog dial for rapid, manual re-cue. This mode is
automatically reset after PLAY/LIVE commands.
Mark Used to enter re-usable cue point (256 cycling cues).
RECORD Initiates “E2E” mode.
Return Inside a clip, allows the operator to return to the same
picture inside the record train, if it still exists.
PRV CTL Enables/disables the Preview Control mode.
Page Selects current clip page, from 1 to 10.
7. LCD Display Provides current status of the system.
2.2 LED COLORS
A selected key lights red.
When a key lights green, it means a value in relation with this key exists.
For example: F1 to F10 keys
• Green light means a clip has been stored in relation with the key.
• Green flashing light means a clip is being created.
• Red light means the clip associated to the key is playing or is ready to play.
2.3 F-KEYS AND SMALL BUTTONS
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
MENU SHIFT CLEAR ENTER
MENU
This button provides access to the Secondary Menu. Also used as
CANCEL in some messages when confirmation is required.
Note: SHIFT + MENU returns to Main menu