EVS XTnano Version 10.04 - January 2011 Operation Manual - Manual (Page 84)

Issue
10.04.A XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
76
increased by the duration of the guardbands, as defined on the
destination system.
• LONG mode: the entire original clips, including their guardbands, will be
copied on the destination system.
7. Once the various options have been decided, press ENTER to confirm the
copy, or MENU to cancel.
The F_ key of the destination playlist will flash until all clips have been copied.
This playlist can be recalled during that process for browsing, editing or playback.
If some clips have not yet been copied, the original network clip is used instead.
9.11.4 H
OW TO
C
OPY A
P
LAYLIST FROM THE
VGA C
LIP
S
CREEN
Copying a playlist using the CUT/COPY/PASTE functions from the Clip screen will
only copy the “EDL” (the playlist definition) and the clips themselves will remain in
their original location.
To copy a playlist from the VGA Clip Screen, proceed as follows:
1. From the VGA Clip Screen, open the playlist bank by pressing END on the
keyboard.
2. Select the playlist to copy and click CTRL + C.
3. Go to the empty playlist location on the same server where you want to copy
the playlist and click CTRL + V.
The EDL of the playlist is copied to the requested location.