EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 44)

How to Enter License Codes from a COD File
In the Server-Based Application
To enter a new license code delivered via a COD file, proceed in one of the following
ways:
1. Copy the .COD file on a USB key that you connect to the USB port of the EVS server.
2. From the Multicam Setup window, press O to open the Options codes management
window.
3. Press simultaneously ALT+ U keys.
OR
1. Copy manually the .COD file to the C:\ drive of the EVS server.
2. In the Multicam Setup menu, press O to open the Options codes management
window.
3. Press simultaneously ALT+ F keys.
The license codes will be read from the .COD file and updated into the system. Next to
the line corresponding to the code, the license type, and the expiration date, if any, are
displayed.
In the Web-Based Interface
To enter a new license code delivered via a COD file, proceed as follows:
1. Copy the .COD file onto a drive available from your PC.
2. From the Multicam Setup window, click Options code management in the Tools
menu to open the Options code management window.
3. Click the Browse button, select the .COD file and click Open.
4. Click Submit.
The license codes will be read from the local file and updated into the system.
The lines corresponding to the new codes area added to the code list.
How to Enter License Codes with a Key Number
In the Server-Based Application
To enter a new license code delivered via a key number, proceed as follows:
1. From the Multicam Setup window, press O to open the Options codes management
window.
2. Type the code you have received. It will automatically be typed in the Validation Code
field:
XTnano Server - Version 11.01 - Configuration Manual
2. Multicam Setup 34