EVS XT3 Version 11.00 Configuration Manual - Manual (Page 100)

SD/HD 2R/CM Configurations
Introduction
The 2R/CM
1
configurations make use of the secondary link of the codec module of a
record channel as an independent recorder. See also the section "Channel Assignment in
2R/CM Configurations" on page 89.
XT3 4U Servers
Available Configurations
The table below shows the available 2R/CM SD/HD configurations with a XT3 4U server,
and how the BNC connectors should be cabled.
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
4 1 PLAY1 MIX1 REC3 REC2 REC1 REC4
5 1 PLAY1 MIX1 REC3 REC2 REC5 REC1 REC4
6 1 PLAY1 MIX1 REC3 REC6 REC2 REC5 REC1 REC4
3 2 PLAY1 MIX1 PLAY2 MIX2 REC2 REC1 REC3
4 2 PLAY1 MIX1 PLAY2 MIX2 REC2 REC4 REC1 REC3
2 3 PLAY1 MIX1 PLAY2 MIX2 PLAY3 MIX3 REC1 REC2
1
Abbreviation standing for ‘2 record channels par codec module’. This
feature allows using the secondary link of the codec module of a
recorder channel as an independent recorder channel.
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 94