EVS XT3 Version 11.00 Configuration Manual - Manual (Page 190)

Make clip rem. trains
Availability This setting is only available if the license code 117 is valid.
Description Allows users to clip all cameras of a remote EVS server if at
least one record train of that server is controlled.
Values Ctrled Cams / All cams
Default value Ctrled Cams
Guardbands
Description Specifies the amount of A/V material that remains available
before and after a clip (called 'guardbands') when the clip is
created.
Values From 00s00fr to 60s00fr
Default Value 05s00fr
Default clip duration
Description Specifies the duration of clips created with only one reference
point (IN or OUT point)
Values Disable, or from 00s01fr to 4h.
When set to 'Disable', both IN and OUT points are required to
be able to create a clip.
The duration can be set:
• With second granularity up to 1 minute
• With minute granularity from 1 minute up to 4 hours.
Default value 04s00fr
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 184