EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 170)

Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
Issue 3.1.B
159
3. Select the requested effect type in the (Left / Right) Audio Transition
command.
The Audio Transition Effect window opens. In this window, you can still select
another effect. The definition of the transitions where the effect will be
applied, in the Area group box, cannot be modified.
4. In the Audio Transition Effect window, fill in the transition parameters to
specify the duration and position of the transition effect.
5. Click OK.
A blue vertical line is added on the transition where the effect has been added:
Once you have assigned the basic type of audio transition, you can zoom and
adjust the audio transition on the timeline, by clicking the Zoom button
on
the right hand side of the required track. The track will then expand vertically
across all of the audio tracks to show the transition.
Note
You can also use the shortcut key + to directly call the
Audio Transition Effect window.