EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 89)

Issue 3.1.B Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
78
When the Recorder area is active, all enabled outputs will be displayed in the
audio meters. If 16 channels are selected, the 8 audiometers are visible at a time
and two arrow buttons allow to shift from channels 1 to 8 to channels 9 to 16:
Db values are displayed on each side. They correspond to the values defined in
Xedio Manager > Parameter Profiles > General > Vumeter for the top level, the
saturation level, the warning level and the bottom level. Values for 0, -2, -4, -8
and -16 are shown as well if they do not overwrite the database values.