EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual User Manual
Page 66
Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
Issue 3.1.B
55
Zone Description
Track Selection
Buttons
They allow the user to select the tracks to be taken into
account when the loaded material is added to the timeline.
See also the section 6.2.8 ‘Selecting the Tracks to be
Added to the Timeline’, on page 64.
Jog and Media Bar
They allow the user to navigate in the loaded material, to
place IN, OUT and nowline points, as well as to modify the
playback speed of the material.
See also the sections ‘Jog’, ‘Media Bar’ and ‘Nowline, Mark
IN and Mark OUT’ from page 60.
Clip Creation Fields
They are used to create new clips, and get the exact
timecode of the nowline, IN and OUT points.
See also the section 6.2.7 ‘Creating and Working with
Clips in the Player’, on page 61.
Cue Point Icons
The cue points make it possible to add reference points to
easily identify positions of interest in the loaded media.
See also the section 6.2.9 ‘Adding Cue Points to the Media
Loaded on the Player Area’, on page 68.
Transport Control
Icons
They are used to play back the loaded media.
See also the section ‘Transport Controls’, on page 57.
Server Recorder
Selection
The
button acts as a toggle switch between the Track
Selection buttons
and the camera selection list
Several cases can occur:
•
If a record train of an EVS Video Server is loaded, this
allows the user to load another record train on the given
server.
•
If a clip belonging to a group of linked clips is loaded
(for example, clips created with ganged channels in
IPDirector), the list displays the various camera angles
and allows the user to select a clip linked to the one
loaded.
•
If an individual clip is loaded, only its recorder channel
is available.
•
If a media ingested from an encoder is loaded, the
button is not available.
You can access the various commands of the Player area, either using the icons
on the user interface, or dedicated keyboard shortcuts (which are assigned in
Xedio Manager).