10 playlist settings, 1 video effect duration, 2 wipe type – EVS XTnano Version 10.04 - January 2011 Configuration Manual User Manual
Page 49: 3 default plst speed, 4 insert in playlist, Playlist settings, Video effect duration, Wipe type, Default plst speed, Insert in playlist
XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
41
3.10 PLAYLIST SETTINGS
Playlist p.4.1
[F1]Video effect duration : 00s10fr
[F3]Wipe type : Vert. L>R
[F4]Default plst speed : Unk.
[F5]Insert in playlist : After
[F6]Confirm Ins/del clips : No
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.10.1 V
IDEO EFFECT DURATION
Possible range: 0s00fr to 20s00fr. Default: 00s10fr
This parameter sets the duration of the video transition effect. The specified
value is used as default value in Playlist Edit mode. Note that the duration of the
video transition when using the TAKE button in 1Pgm+Prv mode has its own
parameter in another section of the Setup menu.
3.10.2 W
IPE TYPE
Possible values: Vert. L>R (default) / Vert. R>L
This parameter specifies the vertical wipe effects from Left to Right or from Right
to Left.
3.10.3 D
EFAULT PLST SPEED
Possible values: Unk. (unknown - default), or from 0% to 100%
This defines the default speed used for clips entered into playlist. “Unknown”
means that the speed of the previous clip in the playlist will be used as a
reference for the current clip. 0% will force the playlist to pause at the end of the
previous clip.
3.10.4 I
NSERT IN PLAYLIST
Possible values: After (default) / Before
This setting defines how the Insert function of playlist will be performed:
depending on the value specified in this setting, the new clip will be inserted after
or before the current clip in the playlist.