Spicer Dana Spicer Steer Axles - Service Manaul User Manual
Page 26
Advertising
22
Disassembly, Overhaul, and
Assembly
8. Ream bushings to proper size using appropriate
Kent-Moore tool (or equivalent).
9. Install new seal, using suitable pilot drift or similar
device that will not damage seal as it is installed.
When installing grease seal, be sure lip is pointing toward
center of knuckle. This is essential for correct seal opera-
tion.
Install
Top Seal
Lip Down
Install
Bottom
Seal
Lip Up
Lip
.060"
(1.52 mm)
.060" (1.52 mm)
CAUTION
Advertising