Pro-torq spindle nut service – Spicer Dana Spicer Steer Axles - Service Manaul User Manual
Page 41
Advertising
37
Wheel Bearing Adjustment
Pro-Torq Spindle Nut Service
Removing Pro-Torq Spindle Nut
Do not attach, loosen, or tighten the Pro-Torq spindle nut
with the keeper ring in place. The keeper ring is a locking
device and must be removed before any adjustment of the
nut.
Care must be taken when removing the keeper ring from the
spindle nut due to the spring-like properties of the ring. Use
appropriate eye protection and shielding when servicing
this part.
To remove Pro-Torq spindle nut, first remove the keeper ring.
Use a screwdriver-like device to carefully pry the keeper ring
from the undercut groove on either side of the spindle nut
until the keeper ring is released.
CAUTION
WARNING
Wheel Bearing Adjustment
Advertising