Spicer Convertible Tandem Axles - Manual (Page 19)

13
Drive Pinion
Drive Pinion
5. Place carrier assembly into a press, place a 2" x 6" x
6" wood block under the pinion. This will ensure that
when the pinion is pressed free from the bearings
the pinion will not be damaged.
6. Use the proper pressing tool to press the end of the
pinion until free from the pinion bearings.

The bearing spacer will be reused or used as a starting
point when resetting the pinion bearing preload. Do not dis-
card this part.
1 - Carrier Assembly
2 - Press
3 - Pinion
4 - Wood Block
2
1
3
4
1 - Press
1
IMPORTANT