Veris Technologies Quad 2800 Soil EC Mapping System - Operating Instructions - Manual (Page 9)

OM17-Quad2800
2-7
Figure 13
Figure 14
Figure 15
Figure 16
The Veris SoilViewer will now install drivers
necessary to operate the included USB-
Serial Converter (part #41377). If you do not
want to use the included converter than press
cancel here, otherwise click next. If you have
the USB- Serial converter plugged in be sure
to unplug it before clicking next.
After the drivers are successfully installed
click finish and Restart your computer before
opening Veris SoilViewer.
Once the computer is restarted the USB to
Serial converter cable can be plugged in,
Windows will recognize the new hardware.
Windows will then advice the new hardware
is installed and ready to use.