VEGA VEGABAR 20 - Manual (Page 5)

VEGABAR 20 5
Product description
1.3 Technical data
Mechanical data
Materials, wetted parts
Process connection brass 2.040, stainless steel 1.4571
Diaphragm ceramic (99,5 % Oxydeceramic)
Measuring cell seal Viton, Kalrez
Materials, non-wetted parts
Housing high resistance plastic PBT (Polyester)
Earth terminal stainless steel 1.4305
Indicating module window glass
Weight
VEGABAR approx. 0,8 kg
Adjustment and indicating elements
Adjustment of the basic functions 2 keys, 1 rotating switch
Menu-guided adjustment with
additional function
- adjustment elements
4 keys
- indicating elements DOT-matrix display, 3 lines with 7 figures each
Indicating module LC-display with
- bargraph (20 segments)
- digital value (4-digits)
- tendency indicators for raising or lowering
values
Electrical data
Connection
Cable entry Pg 13,5 (for cable-ø 5 … 10 mm)
Screw terminals for conductor cross-sections of up to
2,5 mm 2
Protective measures
Protection 1) IP 65
Protection class III
Overvoltage category III
CE-conformity
VEGABAR 20 corresponds to the requirements of EMC (89/336/EWG) and NSR
(73/23/EWG). The conformity has been judged acc. to the following standards:
EMC
Emission EN 50 081 - 1: 1992
Susceptibility EN 50 082 - 2: 1995
NSR EN 61 010 - 1: 1993
1) Use of a suitable seal for the cable in the PG is necessary for maintaining the housing protection. If the seal
used does not fit the cable, it should be replaced by a suitable one.