VEGA VEGABAR 44 HART - Manual (Page 17)

VEGABAR 44 (HART ® ) 17
Depending on parameter:
change value (increase) or
choose from list
Choose menu item or interrupt
input
Acc. to the menu item, save the
adjusted value or change the menu
level
Depending on parameter:
change value (decrease) or
choose from list
Display of:
- measured value
- functions in menu
▼ Jump to the menu below
with OK
▲ Jump to the menu above
with OK
OK
OPERATE
3.00
mbar
+
–
–>
Adjustment elements
4.3 Setup with module "Menu-driven adjustment with additional functions“
The adjustment with the multifunctional mod-
ule is menu-orientated and is made via the
four keys in conjunction with the text display.
The move from the measured value indication
to the main menu is made with the "OK“ key.
Use the "
→
“ key to change within a menu
from one menu item to another.
Branching points
A branching point is shown by the ▼ symbol
and enables a jump to the menu below with
the "OK“ key. In this menu you can find pa-
rameters which are linked (possibly in other
submenus).
Parameters have no ▲ or ▼ symbol. The
value of the parameters can be modified with
the "+“ and "–“ keys or chosen from a list.
When these keys are pushed once, the value
flashes first. When pushed again, the value is
modified. The modified value can be saved
with the "OK“ key. Push the "
→
“ key to inter-
rupt input (without storing the modification).
Certain parameters can be displayed but not
modified.
Setup
Reset
A reset is shown by the ▲ symbol and ena-
bles a jump back to the menu above with the
"OK“ key.
Automatic jump back to measured value
indication is triggered 60 minutes after the
last key push.