VEGA VEGABAR 40 Profibus PA - Manual (Page 15)

VEGABAR 40 (Profibus PA) 15
Depending on parameter:
change value (increase) or
choose out of a list
Choose menu point or inter-
rupt adjustment
Depending on the menu point, save
the adjusted value or change the
menu level
Depending on parameter:
change value (decrease) or
choose out of a list
Indication of:
- measured value
- functions in menu
▼ Jump to the menu below
with the OK key
∆ Reset to the menu above
with the OK key
OK
OPERATE
3.00
mbar
+
–
–>
Adjustment elements
4.3 Setup with module "Menu-driven adjustment with additional functions“
Adjustment with the multifunctional module is
menu-orientated and is made via the four
keys in conjunction with the text display. The
switchover from the measured value indica-
tion to the main menu is done with the "OK“
key. Use the "
→
“ key to change within a menu
from one menu point to another.
Branching points
A branching point is shown by the ▼ symbol
and enables a jump to the menu below with
the "OK“ key. In this menu you can find pa-
rameters which belong together according to
function (possibly in other submenus).
Parameters have no ▲ or ▼ symbol. The
value of the parameters can be modified with
the "+“ and "–“ keys or chosen from the list.
When these keys are pushed once, the value
flashes first. When pushed again, the value is
modified. The modified value can be saved
with the "OK“ key. Push the "
→
“ key to cancel
input (without saving the modification).
Certain parameters can be displayed but not
modified.
Setup
Reset
A reset is indicated by the ▲ symbol and
enables a jump up to the menu above with
the "OK“ key.
An automatic jump back to measured value
indication is triggered 60 minutes after the
last key push.