VEGA VEGABAR 40 Profibus PA - Manual (Page 23)

VEGABAR 40 (Profibus PA) 23
Here you can choose in which unit the adjust-
ment should be made (mbar, psi, kPa). Then
you enter the pressure values corresponding
to 0 % and 100 %. Then click to
OK . The
adjustment is now finished.
Click in the window "Adjustment“ to Zero/
Span .
Then in the window "Zero/Span adjustment“,
you have to choose the type of adjustment. If
you want to carry out the "Adjustment without
taking the actual product into account“ (dry
adjustment), click to
no , then to OK .
If you want to carry out the "Adustment taking
the actual product into account“ (live adjust-
ment), click in this window to
yes , then to OK .
Choose the measurement loop in which you
want to make the parameter adjustment and
click to
OK .
From the window "Instrument data parameter
adjustment“ you reach all submenus of the
sensor. To get familiar with the available op-
tions, try out the buttons one after the other.
You always return to this window. To carry out
the adjustment, click the button
Adjustment .
Sensor parameter adjustment – Adjust-
ment
Click to Instrument data , then to Parameter
adjustment .
Setup