VEGA VEGABAR 40 Profibus PA - Manual (Page 27)

VEGABAR 40 (Profibus PA) 27
Choose the requested measurement loop
and click to
OK .
In the window "Simulation of outputs“, you
click to
Start to begin the simulation. With the
buttons " <– “ and " –> “ (or the slide switch) you
can adjust values between -10 % and 110 %.
Click to
Stop to terminate the simulation .
Note:
The simulation mode is not terminated auto-
matically, but remains active until you switch it
off!
Setup
Pointer function
Click in the window "Instrument data param-
eter adjustment“ to
Meas. loop data .
In the window "Meas. loop data“ all available,
actual sensor values and the peak values
(pointer function) are displayed. With the
button
reset you can reset all displayed peak
values to the actual value all at once.
Simulation
For checking outputs of VEGABAR and con-
nected instruments and components, a pres-
sure can be simulated. Click to
Diagnostics ,
then to Simulation .