VEGA VEGAPULS 43 4 … 20 mA; HART compact sensor - Manual (Page 7)

VEGAPULS 43 – 4 … 20 mA 7
26626-EN-041227
2
2
Adjustment with the PC on the 4 … 20 mA signal and
supply cable or directly on the sensor (figure: a two-
wire sensor)
PLC
The PC can be connected at any measuring
site in the system or directly to the signal
cable. It is connected by means of the two-
wire PC interface converter VEGACONNECT 3
to the sensor or the signal cable. The adjust-
ment and parameter data can be saved with
the adjustment software on the PC and can
be protected by passwords. On request, the
adjustments can be quickly transferred to
other sensors.
1.3 Adjustment
Every measurement set-up is unique. For
that reason, every radar sensor needs some
basic information on the application and the
environment, e.g. which level means "empty“
and which level "full“. Beside this "empty and
full adjustment“, many other settings and
adjustments are possible with VEGAPULS
radar sensors.
The adjustment and parameter setting of
radar sensors is carried out with
- the PC
- the detachable adjustment module MINI-
COM
- the HART ® handheld
Adjustment with the PC
The set-up and adjustment of the radar sen-
sors is generally done on the PC with the
adjustment software PACT
ware TM . The pro-
gram leads quickly through the adjustment
and parameter setting by means of pictures,
graphics and process visualisations.
Adjustment with the PC on the analogue 4 … 20 mA
signal and supply cable or directly on the sensor
(four-wire sensor)
2
2
4 ...20 mA
Product description