VEGA VEGAFLEX 55P (Profibus PA) - Manual (Page 16)

16 VEGAFLEX 55P (Profibus PA)
0%
100%
0,1 m
L
Measuring range
Measuring range
The electrode (rod / cable) cannot be used
over its entire length.
Keep especially in mind that the cable length
cannot be utilised down to the very tip. A
measurement in the area of the gravity weight
is not possible.
Rod 0.15 ... 4 m (with DK value > 4: 0.1 … 4 m)
Cable 0.15 … 20 m (with DK value < 4:
0.3 … 20 m)
Mounting
Sockets Sockets Sockets Sockets Sockets
Avoid long sockets. Mount the sensor flush
and use short sockets with small diameters.
Note under 4.3 Adjustment with PC / Empty
vessel profile.
If VEGAFLEX is mounted on a socket or
mounting boss, the measurement at close
range can be inaccurate. If your socket or
mounting boss exceeds the following
lengths, a storage of the empty vessel
should be carried out.
Thread 1“, 1 1 /
2
“ - Length > 50 mm
Flange DN 50 - Length > 50 mm
Flange DN 80 - Length > 80 mm
Flange
≥
DN 100 - Length > 100 mm