VEGA VEGACAL 63 Profibus PA - Manual (Page 34)

34
7 Set up with PACTware and other adjustment programs
VEGACAL 63 • Profibus PA
30028-EN-130917
7.2 Parameter adjustment with PACTware
Further setup steps are described in the operating instructions
manual "DTM Collection/PACTware" attached to each CD and which
can also be downloaded from our homepage. A detailed description
is available in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGACAL 63, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA agency. In addition, the actual PACTware version is also avail-
able on this CD.
In addition, this DTM Collection incl. the basic version of PACT-
ware can be downloaded free of charge from the Internet. Move via
www.vega.com and "Downloads" to "Software".
7.3 Parameter adjustment with AMS™ and PDM
For VEGA sensors, instrument descriptions for the adjustment
programs AMS™ and PDM are available as DD or EDD. The instru-
ment descriptions are already implemented in the current versions of
AMS™ and PDM.
For older versions of AMS™ and PDM, a free-of-charge download is
available via Internet. Move via www.vega.com and "Downloads" to
"Software".
7.4 Saving the parameter adjustment data
It is recommended to document or save the parameter adjustment
data. That way they are available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profession-
al version provide suitable tools for systematic project documentation
and storage.