5 setup, 1 setup – VEGA VEGAFLEX series 60 Electronics module User Manual
Page 10
5 Setup
5.1 Setup
If you have ordered the electronics module by stating the
sensor serial number, it is ready for operation after
installation and connection to power supply.
If you have ordered the electronics module without stating
the sensor serial number or you are using a suitable
electronics module from stock, you first have to load the
sensor data after installation.
Move via www.vega.com to the item "serial number search".
The order data of the sensor will be displayed after entering
the serial number.
Fig. 4: Example for the order data of a sensor.
Below the order data you will find as an XML file "Sensor data
for Service-DTM". Load these data with "Save target as" to
your PC and finally export them via PACTware™ and the
Service DTM to the sensor.
With sensor serial number
Without sensor serial number
Load sensor data
10
Electronics module - VEGAFLEX series 60
Setup
30207
-EN
-050607