VEGA VEGAFLEX series 60 Electronics module - Manual (Page 9)

2
1
Fig. 3: Loosen the screws
1 Electronics module
2 Screws (2 pcs.)
5 Pull the previous electronics out by holding the opening
levers.
6 Insert the new oscillator carefully.
7 Screw in and tighten the two screws with a Phillips
screwdriver.
8 Connect the connection cables acc. to the operating
instructions manual of the respective sensor
9 Screw the housing cover back on
The electronics exchange is finished.
As a rule, the exchange of the electronics must be
documented internally when used in Ex applications.
Electronics module - VEGAFLEX series 60 9
Mounting
30207
-EN
-050607