4 mounting procedure – VEGA VEGAFLEX series 60 Electronics module User Manual
Page 8
Advertising
4.4 Mounting procedure
The electronics module is located in the electronics compart-
ment. The below illustrations show the respective position of
the electronics compartment in a single or double chamber
housing.
1
Fig. 1: Single chamber housing
1
Position of the electronics module
1
Fig. 2: Double chamber housing
1
Position of the electronics module
Proceed as follows:
1 Switch off power supply
2 Unscrew housing cover of the electronics compartment
3 Disconnect the connection cables acc. to the operating
instructions manual of the respective sensor
4 Loosen the two screws with a Phillips screwdriver (size 1)
Mounting procedure
8
Electronics module - VEGAFLEX series 60
Mounting
30207
-EN
-050607
Advertising