VEGA VEGAPULS 61 (≥ 2.0.0 - ≤ 3.8) Profibus PA - Manual (Page 18)

ca. 10 mm
Fig. 10: Recommended socket mounting
If the reflective properties of the medium are good, you can mount
VEGAPULS
61 on sockets which are higher than the length of the
antenna. You will find recommended values for socket heights in the
following illustration. The socket end should be smooth and burr-free, if
possible also rounded. After installation you must carry out a false
echo storage.
d
h
d h
1½"
50 mm/2"
80 mm/3"
100 mm/4"
150 mm/6" 200 mm
250 mm
300 mm
500 mm
800 mm
Fig. 11: Deviating socket dimensions
In liquids, align the sensor as vertical as possible to the product
surface to achieve optimum measuring results. Orientation of the sensor
18 VEGAPULS 61 • Profibus PA
4 Mounting
28444
-EN
-100426