VEGA VEGAPULS series 60 Electronics module (≥ 2.0.0 - ≤ 3.8) User Manual
Page 11
Advertising
1
Fig. 1: Single chamber housing
1
Position of the electronics module
1
Fig. 2: Double chamber housing
1
Position of the electronics module
Proceed as follows:
1 Switch off power supply
2 Unscrew housing cover of the electronics compartment
3 Disconnect the connection cables according to the
operating instructions manual of the respective sensor
4 Loosen the two holding screws with a screwdriver (Torx
size T 10 or slot size 4)
2
1
Fig. 3: Loosen the screws
1
Electronics module
2
Screws (2 pcs.)
Electronics module - VEGAPULS series 60
11
Mount
30176
-EN
-070220
Advertising